How to reset Xbox 360: Have you bought a second-hand Xbox 360 and, to your surprise, by turning on the console you have found all the data and settings of the old owner? At this point the best thing you can do is reset the Xbox so that it returns to the factory state and erase all data stored in it. How do you say? Have you already thought about it but you don’t know how to do it? Don’t worry, you’ve come to the right place at the right time.
With today’s guide, we’ll see together how to reset xbox 360 erasing all data in the console memory and restoring the system settings to the factory state. At the end of the operation, the Xbox will look like it has just come out of the sales package (at least as regards the software side!) And can be configured with the data and settings of a new user, that is you.
What else to add? Take some time off, grab your Xbox controller and proceed with formatting the console following the instructions below. I assure you that this is a much faster and easier operation than you imagine.
Before you go to work and reset Xbox 360here are some preliminary steps you may need to take.
If you’ve purchased a second-hand Xbox and your intention is to erase all data on the console, this step isn’t necessary. In other circumstances, however, if for example you are about to reset an Xbox that you have already used in the past, you may want to create a backup copy of your data.
To create a backup of the data stored on the Xbox 360, you need to connect a USB stick or an external hard drive to the console and go to the menu Settings> System> Storage Devices.
After that you have to select the icon of memory unit of the Xbox by pressing the button Y of the controller, you have to choose the option Transfer content and you must indicate the drive on which you want to copy your data (i.e. the key or hard disk that you connected to the Xbox). At this point, press the button Start and starts the transfer of games and apps, demos, videos and all other data present on the console memory.
Disabling parental controls
If your Xbox 360 has parental controls (called “Content Controls”) enabled, you may encounter problems formatting the console and / or transferring the data stored on it.
To disable the parental control functions, go to the menu Settings> Family of the Xbox and type the unlock code previously set on the console. Next, put the check mark next to the item Disabledpresses the button Save and exit and that’s it.
If you do not know the Xbox 360 unlock code and therefore you are unable to change the Content Control settings, enter a wrong code and select the item Reset your passcode from the screen that opens. Then answer the Security Question that was previously set on the console and you will finally be able to access the parental control settings.
If you don’t even know the answer to your security question, contact Xbox Technical Support via the Internet or by phone, calling the number 800-787-614.
Retrieving the Console Serial Number
In some circumstances, it is necessary to enter the serial number of the console when formatting the Xbox. Before getting to work, therefore, go to the settings of your Xbox 360 and write down its serial number in a safe place.
To find out the Xbox 360 serial number, go to the menu Settings> System> Console Settings> System Information. The code of your interest is the one next to the item Console serial number.
How to format Xbox 360
Now is the time to take action and say reset Xbox 360. To delete all the data in the console memory, go to the menu Settings> System> Storage Devicesselect the icon of Memory Unit pressing the button Y of the controller and go up first Format and then on Yup. The data deletion procedure will take a few seconds. When finished, the console will restart automatically.
At this point you can restore the Xbox 360 operating system to its factory state by doing a factory reset. To do this, go to the menu Settings> System> Initial Setup and answer Yup notice that appears on the screen.
Now you have to go through the initial Xbox 360 setup procedure. Then press on middle button of the controller, set the language where you intend to use the console (ex. Italian), set yours geographic area of residence (eg. Italy) and choose whether or not to activate i Check content.
After this step too, set a network connection choosing from the available wireless networks (or connecting the console to the network via an Ethernet cable) and wait for the connection status to be checked. Then press the button Forward and choose whether to set up your Xbox Live account by selecting the option Join Xbox Live or whether to start using the Xbox without connecting to Xbox Live by selecting the item Go play.
Other useful tips
- If after formatting the Xbox you want to copy previously saved data to the console, go to the menu Settings> System> Storage Devices and transfers the data from the USB key or the hard disk on which the backup is present to the Memory Unit. The procedure to follow is the same as we have seen previously, but obviously the other way around (from the external unit to the Memory Unit).
- If you want to reset the Xbox 360 due to errors that appear in certain games or apps (so not to clear the data on the console), try clearing the cache. To do this, go to the menu Settings> System> Storage Devicesselect the icon of memory unit pressing the button Y of the controller and select the option Free system cache from the box that opens.