Skip to content

How to configure SMTP Fastweb

Rate this post

How to configure SMTP Fastweb: After consulting my guide on Internet offers you have decided to replace your old carrier with Fastweb. At the moment you can say that you are very satisfied with the choice made and you particularly appreciated the fact that, together with the chosen solution, you were also provided with a Fastweb e-mail address. However, if you are here now and are reading this guide, it is most likely because you are having difficulty sending emails through your email account. FastMail. If this is indeed the case, know that most likely the fault lies with the SMTP server, that is to say “the one” that takes care of the outgoing mail. How do you say? Is everything clear to you and would you like to understand if I can give you a hand to cope with this? Well, of course you do! In fact, with today’s guide I’ll explain how configure SMTP Fastweb.

Before you can get scared and think about the worst, however, I would like to point out right away that contrary to appearances, configuring SMTP Fastweb is not at all complicated, you just need to know where to put your hands and that’s it, really. Whether you are a more or less expert user in new technologies therefore makes no difference, you have my word.

That said, if you are interested in understanding how to configure SMTP Fastweb I suggest you get comfortable, take a few minutes of free time and concentrate on reading the instructions I am about to give you. I am sure that in the end you will be able to tell yourself more than satisfied and that if necessary you will also be ready and willing to explain to your acquaintances in need of a similar tip how to do it. Let it bet?

Configure SMTP Fastweb on computer

If you want to configure SMTP Fastweb correctly, so that you can use your e-mail box without problems using special software for computer, and if you haven’t already added your Fastweb email account to the client, the first thing you need to do is start the client by clicking on its icon. Once this is done, you can configure SMTP Fastweb by starting the wizard for adding a new email address by following the instructions below. If, on the other hand, you have already configured the e-mail client on your computer and you are interested only and exclusively in understanding which parameters to use to configure SMTP Fastweb, access the program settings for managing emails and go directly to reading the following lines in order to make any changes to it.

  • If you use Microsoft Outlook go to the menu Fileclick on Account settings and then on New one and fill out the form that is proposed to you with the settings I am about to communicate to you.
  • If you use Window Mail access the menu Instrumentsclick on Account and then presses the button add attached to the window that opens. Then choose to create a new e-mail account and fill out the form proposed with the information you find below.
  • If you use Mozilla Thunderbird click on the button Menu located at the top right, go to the menu New messageclick on Existing email account and fill out the form that is proposed to you with the information I am about to give you.
  • If you have a Mac and use Mail click on the menu Mailthen press on Preferences located at the top left and select the item Account from the window that appears. Then press the button +choose the item Add another email account … and fill out the form that is proposed to you using the information you find below.

For more information on the exact procedure to be performed you can click here to connect to the appropriate support page on the operator’s official website where you can find further information to correctly configure the Fastweb mailbox.

Screenshot of Mail on Mac

Now, in order to use the e-mail management program you have chosen, proceed by selecting the type of protocol you intend to use with the Fastweb e-mail box, choosing between IMAP And POP3.

Keep in mind that the IMAP protocol, which is the one I recommend you use, is more modern and allows the use of the same account on multiple devices at the same time, keeping messages synchronized (both incoming and outgoing) on ​​all workstations while the POP3 protocol is older and requires the use of the e-mail service on a single device, in fact it deletes messages from remote servers as soon as they are downloaded to the PC (except for the activation of special backup functions).

Having made this important clarification, here are the “coordinates” to use both protocols in Microsoft Outlook, Mozilla Thunderbird, Apple Mail and any other traditional mail client.

IMAP

  • Incoming mail server (IMAP): imap.fastwebnet.it
    • Port: 993
    • Requires SSL: yes
    • Requires authentication: yes
  • Outgoing mail server (SMTP): smtp.fastwebnet.it
    • Port: 587
    • Requires SSL: yes
    • Requires authentication: yes
  • Full name or display name: [Il tuo nome]
  • Account Name or Username: Fastweb e-mail address (e.g. name@fastwebnet.it)
  • Email address: Fastweb e-mail address (e.g. name@fastwebnet.it)
  • Password: password chosen when creating the Fastweb mailbox

POP3

  • Incoming mail server (POP3): pop.fastwebnet.it
    • Port: 995
    • Requires SSL: yes
    • Requires authentication: yes
  • Outgoing mail server (SMTP): smtp.fastwebnet.it
    • Port: 587
    • Requires SSL: yes
    • Requires authentication: yes
  • Full name or display name: [Il tuo nome]
  • Account Name or Username: Fastweb e-mail address (e.g. name@fastwebnet.it)
  • Email address: Fastweb e-mail address (e.g. name@fastwebnet.it)
  • Password: password chosen when creating the Fastweb mailbox

At this point you should finally be able to set up Fastweb SMTP on your computer.

To verify that the configuration of the e-mail box, first of all that of the SMTP server, went the right way, try to compose and send a new e-mail using your Fastweb box and the client on the computer just configured, following the instructions that you I have provided in my guide on how to send an email. So make sure that the email is sent correctly and that no errors are reported. If you still encounter problems, I suggest you check the correct insertion of the configuration parameters of the Fastweb mailbox.

Configure SMTP Fastweb on smartphones and tablets

If you want to configure SMTP Fastweb correctly so that you can use your e-mail box without problems using special clients to smartphone And Tablet the first thing you need to do is access the home screen of your device, search for the reference app and start it. Then proceed as indicated below. If, on the other hand, you have already configured the e-mail client on your smartphone or tablet and you are interested only and exclusively in understanding which parameters to use to configure SMTP Fastweb, access the settings of the email management app and go directly to reading the following lines in in order to make any changes.

  • If you use a iPhone or a iPad and you want to exploit Mailthe default iOS e-mail client, you can configure SMTP Fastweb by pressing on Settings present on the home screen, by selecting the item Mailby tapping on the items Account And Add accountpressing on Other and filling in the fields displayed on the screen with the information I am about to provide you. For more information on the exact procedure to be performed you can click here to connect to the appropriate support page on the operator’s official website where you can find further information to correctly configure the Fastweb mailbox on an iOS device.
  • If you use an Android smartphone or tablet and want to use the default client of your device, you can configure SMTP Fastweb by starting the app E-mail present in the screen where all the apps are grouped, by typing your e-mail address and the password associated with it in the fields Email address And Password and then pressing on the voice Config. manual located at the top right. Then fill in the fields that are proposed to you with the information I am about to give you. For more information on the exact procedure to be performed you can click here to connect to the appropriate support page on the operator’s official website where you can find further information to correctly configure the Fastweb mailbox on an Android device.

Screenshot of Mail on iPhone

At this point, in order to configure SMTP Fastweb starts the wizard for adding a new e-mail address, indicates the type of protocol you intend to use by choosing between IMAP And POP3 and type the same data that I provided you in the previous lines, when I explained how to configure SMTP Fastweb on a computer.

Finally, make sure that the configuration procedure of the e-mail box, in particular the SMTP server of the same, has gone the right way by trying to compose and send a new message using your Fastweb box and the client on your newly configured smartphone or tablet. . Therefore, check that the email is sent correctly and that no errors are notified to you. If you still encounter problems, I suggest you check the correct insertion of the configuration parameters of the Fastweb mailbox.